Kobelco Air Filter Replacement

Product Detail

Detalis:

Working time>2000H

Initial pressure difference<0.02MPa

Residual oil amount<3PPM




Air compressor models	Original filter part No.	Air compressor models	Original filter part No.
SG/AG230AD/A	S-CE05-501	AG22A/ AH/ GH	PS-CE03-517
SG370AD/A	S-CE05-502	AG30A/AH/GH	PS-CE03-511
SG/AG610AD/A	S-CE05-503	AG37A/AG/GH	PS-CE03-511
SG/AG900AD/A	S-CE05-503	AG55A/AG/GH	PS-CE03-509
SG/AG1230AD/A	P-CE05-503	AG75A/AG/GH	PS-CE03-509
VS240AD	S-CE05-501	KS15A	PS-CE03-516
VS410AD/A	S-CE05-502	KS22A/AV	PS-CE03-516
VS660AD/A	S-CE05-503	KS30A	PS-CE03-517
VS990AD/A	S-CE05-504	KS37A/AV	PS-CE03-517
VS1310AD/A	S-CE05-505	KS45A	PS-CE03-511
SG/AG280A-15	S-CE05-502	KS55A/AV	PS-CE03-511
AG390A-22	S-CE05-503	KS75A/AV	PS-CE03-509
SG/AG580A-30	S-CE05-503	KS90A/AV	PS-CE03-509
SG/AG720A-37	S-CE05-504	VS22H/GH	PS-CE03-517
SG/AG1070A-55	P-CE05-576	VS37H/GH	PS-CE03-511
SG/AG1490A-75	P-CE05-576	VS55H/GH	PS-CE03-509
VS420A-22	S-CE05-503	VS75H/GH	PS-CE03-509
VS730A-37	S-CE05-504	XG2140WV-110	PS-CE05-501
VS1020A-55	S-CE05-507	XG2540WV-132	PS-CE05-501
VS1500A-75	P-CE05-576	XG3030A-160	PS-CE11-501
AG15A/AH/GH	PS-CE03-517

?REMARK: We can provide the replacement part of famous brands.





    




Kobelco air filter maintenance, effective maintenance, make more efficient use of the product.

Serviced once a week:First open the gland nut, remove the air filter;0.2-0.4Mpa of compressed air, blowing dust particles on the outer surface of the air filter from the air filter lumen outward;Use a clean rag to clean the inner wall of the empty shell wiped clean, back to the air filter;Note that the distal end portion of the seal air filter to the air filter housing end surface closely bonded;Diesel powered screw machine diesel intake air filter maintenance should be carried out simultaneously with the air compressor air filter, The same maintenance methods.




1000-1500 hours to replace:Due to the screw inside the gap allows less than 15u particles into.If the empty filter plugged, will make the macromolecular particles into the air compressor.Not only will it shorten the use of oil filters and oil separators, but it will also directly accelerate the wear of the rotor and bearings.Increase rotor clearance and reduce compression efficiency.So to be replaced within a period of time.If it is mines, ceramics factory, cotton mill and other harsh environments, it is recommended 500 hours to replace the new air filter.




Cleaning and replacement of air filter: Parts must be mutually corresponding to prevent foreign objects fall into the intake valve.

Check for damage:Usually have to check the intake manifold often damaged, flat suction,Telescopic tube with intake air filter loose connection port, leakage,If found to be timely repair, replacement.